Minco 420 water pump controller adopts high performance microprocessor and industry components, concentrates measure, control, protect and four-remote function together, which can display all measuring parameter, control parameter and working state of generator, and it’s all the input and output ports support user-defined function, anti-jamming ability is strong, and actually meets different types of generator’s automation requirements.

I. Function Character:
1. Wide-screen LCD display with 128×64 lattice and black-light；
2. Chinese and English double language menu, mutual operation, can be set and operated without the computer；
3. Auto start, auto protection, auto load function; MINCO 420 Water Pump Controller
4. Perfect auto protection, warning details and working statement character display directly, fault record more than 50 items；
5. Abundant of lift measure、water temperature、oil pressure、oil level etc. connection parameter;
6. All relay contact capability of strat and fuel is above 10A/250VAC/30VDC, others are 5A； User-defined to all input and output port, Timing start and stop function；
7. RS232 communication. This is optional function, which attached “four remote control” monitor software

II. Control Parameters:
1.Switch inputs (6 items)
Remote start、emergency stop、user-defined input1-4（Optional：monitor，low oil pressure；high coolant temperature；acceleration limit；deceleration limit；high oil temperature；low fuel level（alarm non-stop）；high fuel level； float charge fail alarm；alarm；alarm non-stop（running state）；
alarm stop, oil pressure permissive remote reset etc.）；
2.Rely output (6 items)
Fuel、start、user-defined1-4（common failure；auxiliary stop；genset supply；automation；closed on idleing；opened on idleing；pre-fuel；warm up；acceleration；deceleration；over speed；high speed；low battery vol.；pumping；alarm etc.）
3.Delay setting (22 items)
Delay of cool down；delay of pre-fuel；delay of genset start；delay of idle start；delay of crank interval；delay of idle stop；crank time；acceleration delay；bypass time；delay of auxiliary input 1；delay of energize to stop(ETS)；delay of auxiliary input 2； delay of auxiliary input 3；overload delay；delay of auxiliary input 4；lift fault delay; over voltage delay；delay of charge failure；delay of over frequency；delay of low battery；delay of warm up；delay of transform；deceleration delay；
4.System parameter setting (17 items)
Strip speed, flywheel teeth, lift demarcate, password setting, address, fuel setting, output 1 setting；output 2 setting, output 3 setting,output 4 setting, input 1 setting, input 2 setting, input 3 setting, input 4 setting, start method；display mode；language choose；back light choose；hiding run

III. External Features
1.Size of outside：front panel(L×WxD) 96x96x9mm
Back shell(LxWxD) 84x84x50 mm
2. Hole size of installation (L×W) 85x85mm